| Manufacturer | Model | Year | Machine ID | Type Machine | Control | Condition | U / P | ShortSpecs | Photos | List |
| Bertram | 60" | 1956 | 7569 | BORING MILLS, VERTICAL and VTL | | Good | Yes | | Yes | 1956 Bertram 60" |
| Betts | 112" | | 8063 | BORING MILLS, VERTICAL and VTL | | Good | Yes | | Yes | Betts 112" |
| Bullard | 36" Cutmaster | 1943 | 9723 | BORING MILLS, VERTICAL and VTL | | Good | Yes | | Yes | 1943 Bullard 36" Cutmaster |
| Bullard | 36" Cutmaster | 1954 | 9726 | BORING MILLS, VERTICAL and VTL | | Good | Yes | | Yes | 1954 Bullard 36" Cutmaster |
| Bullard | 36" Cutmaster | 1958 | 8124 | BORING MILLS, VERTICAL and VTL | | Very Good | Yes | | Yes | 1958 Bullard 36" Cutmaster |
| Bullard | 36" Dynatrol | 1964 | 7889 | BORING MILLS, VERTICAL and VTL | | Good | Yes | 36" 3-Jaw Chuck, 48" Swing, 30" Under Rail, 3008 RPM, 50 HP, 4-Pos. Turret Head, Power Rapid Traverse All Directions, Full Pendant Control, Hardened and Ground Ways | Yes | 1964 Bullard 36" Dynatrol |
| Bullard | 36" Dynatrol | 1967 | 6549 | BORING MILLS, VERTICAL and VTL | | Very Good | Yes | | Yes | 1967 Bullard 36" Dynatrol |
| Bullard | 36" Man-Au-Trol | 1952 | 9156 | BORING MILLS, VERTICAL and VTL | | Fair | No | | Yes | 1952 Bullard 36" Man-Au-Trol |
| Bullard | 36" Spiral Drive | | 8066 | BORING MILLS, VERTICAL and VTL | | Good | Yes | | Yes | Bullard 36" Spiral Drive |
| Bullard | 36" Spiral Drive | | 8413 | BORING MILLS, VERTICAL and VTL | | Godd | Yes | | Yes | Bullard 36" Spiral Drive |
| Bullard | 36" Spiral Drive | | 8420 | BORING MILLS, VERTICAL and VTL | | Good | Yes | | Yes | Bullard 36" Spiral Drive |
| Bullard | 36" Spiral Drive | 1942 | 8479 | BORING MILLS, VERTICAL and VTL | | Very Good | Yes | | Yes | 1942 Bullard 36" Spiral Drive |
| Bullard | 36" Spiral Drive | 1942 | 8064 | BORING MILLS, VERTICAL and VTL | | Good | Yes | | Yes | 1942 Bullard 36" Spiral Drive |
| Bullard | 36" Spiral Drive | 1943 | 8062 | BORING MILLS, VERTICAL and VTL | | Good | Yes | | Yes | 1943 Bullard 36" Spiral Drive |
| Bullard | 42" Cutmaster | | 9430 | BORING MILLS, VERTICAL and VTL | | Very Good | Yes | | Yes | Bullard 42" Cutmaster |
| Bullard | 42" Cutmaster | | 8544 | BORING MILLS, VERTICAL and VTL | | Very Good | No | | Yes | Bullard 42" Cutmaster |
| Bullard | 42" Cutmaster | 1945 | 9724 | BORING MILLS, VERTICAL and VTL | | Very Good | Yes | | Yes | 1945 Bullard 42" Cutmaster |
| Bullard | 42" Cutmaster | 1948 | 9722 | BORING MILLS, VERTICAL and VTL | | Good | Yes | | Yes | 1948 Bullard 42" Cutmaster |
| Bullard | 42" Cutmaster | 1952 | 9773 | BORING MILLS, VERTICAL and VTL | | Good | Yes | | Yes | 1952 Bullard 42" Cutmaster |
| Bullard | 42" Cutmaster | 1952 | 8563 | BORING MILLS, VERTICAL and VTL | | | Yes | | Yes | 1952 Bullard 42" Cutmaster |
| Bullard | 42" Cutmaster | 1954 | 6223 | BORING MILLS, VERTICAL and VTL | | Very Good | No | | Yes | 1954 Bullard 42" Cutmaster |
| Bullard | 42" Spiral Drive | | 8564 | BORING MILLS, VERTICAL and VTL | | Good | Yes | | Yes | Bullard 42" Spiral Drive |
| Bullard | 42" Spiral Drive | | 9761 | BORING MILLS, VERTICAL and VTL | | Good | Yes | | Yes | Bullard 42" Spiral Drive |
| Bullard | 42" Spiral Drive | 1946 | 8067 | BORING MILLS, VERTICAL and VTL | | Good | Yes | 42" 4-Jaw Chuck, 45" Swing - Side Up, 54" Swing Side Down, 37" Under Rail, 120 RPM, 30 HP, One (1) Five Sided Turret Head, One (1) Side Head | Yes | 1946 Bullard 42" Spiral Drive |
| Bullard | 46" Dynatrol | 1973 | 5869 | BORING MILLS, VERTICAL and VTL | | Very Good | Yes | | Yes | 1973 Bullard 46" Dynatrol |
| Bullard | 52" Dynatrol | 1967 | 5860 | BORING MILLS, VERTICAL and VTL | | Good | Yes | | Yes | 1967 Bullard 52" Dynatrol |
| Bullard | 54" Cutmaster | 1944 | 8776 | BORING MILLS, VERTICAL and VTL | | Good | Yes | | Yes | 1944 Bullard 54" Cutmaster |
| Bullard | 54" Cutmaster | 1952 | 8687 | BORING MILLS, VERTICAL and VTL | | Good | Yes | | Yes | 1952 Bullard 54" Cutmaster |
| Bullard | 54" Spiral Drive | | 8567 | BORING MILLS, VERTICAL and VTL | | Good | Yes | | Yes | Bullard 54" Spiral Drive |
| Bullard | 56" Dynatrol | | 8572 | BORING MILLS, VERTICAL and VTL | | Good | Yes | | Yes | Bullard 56" Dynatrol |
| Bullard | 64" Cutmaster | 1962 | 8103 | BORING MILLS, VERTICAL and VTL | | Good | Yes | | Yes | 1962 Bullard 64" Cutmaster |
| Bullard | 74" Cutmaster | 1954 | 8459 | BORING MILLS, VERTICAL and VTL | | Very Good | Yes | | Yes | 1954 Bullard 74" Cutmaster |
| Bullard | 86" Dynatrol | 1976 | 8392 | BORING MILLS, VERTICAL and VTL | | Very Good | Yes | | Yes | 1976 Bullard 86" Dynatrol |
| Cincinnati | 84" Hypro | | 9574 | BORING MILLS, VERTICAL and VTL | | Good | | 84" 4-Jaw Chuck, 89" Swing, 70" Under Rail, 70 RPM, 30 HP, Two (2) Swivel Type Ram Heads, Pendant Controls, Table Guarding, Power Rail Elevation, Anti-Friction Table Track, Coolant System, Floor Standing - No Pit Required | Yes | Cincinnati 84" Hypro |
| Cincinnati | 92" Hypro | | 8388 | BORING MILLS, VERTICAL and VTL | | Good | No | 92" 4-Jaw Chuck, 102" Swing, 64" Under Rail, 43 RPM, 40 HP, Two (2) Ram Head(s), One (1) Side Head, Pendant Controls, No Pit Required | Yes | Cincinnati 92" Hypro |
| Dorries | 40" | 1977 | 8443 | BORING MILLS, VERTICAL and VTL | | Very Good | Yes | | Yes | 1977 Dorries 40" |
| Froriep | 6KE 260/610-120 | 1970 | 8200 | BORING MILLS, VERTICAL and VTL | | Very Good | No | | Yes | 1970 Froriep 6KE 260/610-120 |
| Giddings and Lewis | 52" Hypro | 1947 | 9826 | BORING MILLS, VERTICAL and VTL | | Good | Yes | | Yes | 1947 Giddings and Lewis 52" Hypro |
| Giddings and Lewis | 72" Hypro | 1955 | 9514 | BORING MILLS, VERTICAL and VTL | | Good | No | | Yes | 1955 Giddings and Lewis 72" Hypro |
| Giddings and Lewis | Model 61 | 1954 | 8114 | BORING MILLS, VERTICAL and VTL | | Very Good | Yes | | Yes | 1954 Giddings and Lewis Model 61 |
| Gray | Model 60 | 1966 | 9775 | BORING MILLS, VERTICAL and VTL | | Very Good | Yes | | Yes | 1966 Gray Model 60 |
| King | 42" | 1955 | 8198 | BORING MILLS, VERTICAL and VTL | | Good | Yes | | Yes | 1955 King 42" |
| King | 62" | | 10090 | BORING MILLS, VERTICAL and VTL | | Good | Yes | | Yes | King 62" |
| King | 62" | 1948 | 8285 | BORING MILLS, VERTICAL and VTL | | Good | Yes | 62" Table, 72" Swing, 62" Under Rail, 103 RPM, 50 HP, Two Ram Head(s), One Side Head, 66" 4-Jaw Manual Chuck, Pendant Control | Yes | 1948 King 62" |
| King | 64" | | 8575 | BORING MILLS, VERTICAL and VTL | | Good | Yes | | Yes | King 64" |
| King | 84" | | 8390 | BORING MILLS, VERTICAL and VTL | | Very Good | No | | Yes | King 84" |
| King | 84" | | 8418 | BORING MILLS, VERTICAL and VTL | | Good | Yes | | Yes | King 84" |
| King | 96" | | 8391 | BORING MILLS, VERTICAL and VTL | | Very Good | | | No | King 96" |
| King | 96" | 1942/02 | 8410 | BORING MILLS, VERTICAL and VTL | | Good | Yes | | Yes | 1942/02 King 96" |
| King | V-7 - 100" | 1950 | 8106 | BORING MILLS, VERTICAL and VTL | | Fair | Yes | | Yes | 1950 King V-7 - 100" |
| Morando | TVK-120 | | 8069 | BORING MILLS, VERTICAL and VTL | | Good | Yes | | Yes | Morando TVK-120 |
| Niles | 144" | | 8201 | BORING MILLS, VERTICAL and VTL | | Good | Yes | | Yes | Niles 144" |
| O-M Ltd. | TMO-20 | 1971/1980 | 8975 | BORING MILLS, VERTICAL and VTL | | Good | Yes | | Yes | 1971/1980 O-M Ltd. TMO-20 |
| Pensotti | KN-950 | 1968 | 9103 | BORING MILLS, VERTICAL and VTL | | Very Good | Yes | 34" 4-Jaw Chuck, 36" Swing, 35.43" Under Rail, 200 RPM, 25 HP, Turret Head, Side Head, Threading, Power Rapids, Floor Mount | Yes | 1968 Pensotti KN-950 |
| Rafamet | KCF-400 | 1975 | 9032 | BORING MILLS, VERTICAL and VTL | | Very Good | Yes | | Yes | 1975 Rafamet KCF-400 |
| Schiess | KE-100 | 1976/95 | 8277 | BORING MILLS, VERTICAL and VTL | | Very Good | Yes | | Yes | 1976/95 Schiess KE-100 |
| Schiess | KE-125 | 1952 | 7336 | BORING MILLS, VERTICAL and VTL | | Good | Yes | | Yes | 1952 Schiess KE-125 |
| Summit | SC-14 | 1979 | 8771 | BORING MILLS, VERTICAL and VTL | | Very Good | Yes | | Yes | 1979 Summit SC-14 |
| Vulcan | C5116A | 2008 | 8100 | BORING MILLS, VERTICAL and VTL | | Excellent | Yes | | Yes | 2008 Vulcan C5116A |
| Webster and Bennett | 48" | 1960 | 8490 | BORING MILLS, VERTICAL and VTL | | Good | Yes | | Yes | 1960 Webster and Bennett 48" |
| Webster and Bennett | 60" | | 9024 | BORING MILLS, VERTICAL and VTL | | Good | Yes | | Yes | Webster and Bennett 60" |
