MoriSeikiMachines.Com
All The Used Mori-Seiki Machine Tools You Need - All Of The Time
 Office (352) 799-8398
Fax (352) 799-0315
Click Here to Email Us
Copyright © 2012 Machine Tools 24/7.  All Rights Reserved.
Click Here to Bookmark this Site
All Machines Available By Type

You Can Sort The Table Below By Clicking on The Column Header (table pre-sorted by Mfg, Model, then Year)
Click On The Machine ID Number Below To View Machine Quote & Photos
ManufacturerModelYearMachine IDType MachineControlConditionU / PShortSpecsPhotosList
DaewooPuma-1500 SY200516444LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEFanuc 18iTBGoodYes23.6"" Swing, 12.9" Turn Dia., 33.8" Centers, 6,000 RPM, 20 HP, 12 Sta. Turret, Collet Chuck on Main and Sub-Spindle, Chip Conveyor, Tool Presetter, Part Catcher, Parts Conveyor, MoreYes2005 Daewoo Puma-1500 SY Fanuc 18iTB
DMG MoriNLX-2000 SY201616603LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEMori-Seiki CelosExcellentYes36.37" Swing, 29.72" SOC, 14.01" Turning Dia., 19.6" Turning Length, 5,000 RPM, 2.5" Bar Cap., 30 HP, Chip Conveyor, Bar Feed Interface, Twenty (20) Station Turret Option, More..Yes2016 DMG Mori NLX-2000 SY Mori-Seiki Celos
DMG MoriNLX-2500 SY - 700201116585LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEMori-Seiki MSX-853 IVVery GoodYesSwing 36.37", Swing Over C.S. 29.72", Maximum Turning Diameter 14.4", Length 27.75", 4,000 RPM, 3.1" Bar Cap., 25 HP, 12 Sta. Turret, Parts Catcher, Bar, More.Yes2011 DMG Mori NLX-2500 SY - 700 Mori-Seiki MSX-853 IV
DMG MoriNLX-2500 SY - 700201716213LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEMitsubishi M730UMLike NewYes Yes2017 DMG Mori NLX-2500 SY - 700 Mitsubishi M730UM
DoosanPuma-2600 SY201816548LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEFanuc 31iTDExcellentYes Yes2018 Doosan Puma-2600 SY Fanuc 31iTD
HaasDS-30 SSY201116558LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEHaas ControlVery GoodYesSwing Over Bed 31.75", Swing Over Saddle 20.75", Maximum Turning Diameter 16", Length 18", 4,800 RPM, 30 HP, 12 Sta. Turret, Y-Axis, Sub-Spindle, Live Tooling, More..Yes2011 Haas DS-30 SSY Haas Control
HardingeConquest T-42199416369LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEFanuc 18TVery GoodYes21.2" Swing, 14.5" SOC, 5,000 RPM, 1.625" Bar Cap., 10 HP, 12 Sta. Turret, 16C Collet Chuck on Main and Sub, Toolsetter, Parts Catcher, MoreYes1994 Hardinge Conquest T-42 Fanuc 18T
HardingeElite 51 MS200815681LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEFanuc 18iTBVery GoodYes Yes2008 Hardinge Elite 51 MS Fanuc 18iTB
HardingeQuest 6-42 SP200615420LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEFanuc 160iTGoodYes Yes2006 Hardinge Quest 6-42 SP Fanuc 160iT
Hyundai-KiaSKT-21 LMS200916583LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEFanuc OiTCVery GoodYesSwing 21.7"", Swing Over C.S. 13.8", Maximum Turning Diameter 10.2", Length 20.87", 4,000 RPM, 2.56" Bar Cap., 20 HP, 12 Sta. Turret, Parts Catcher - Conveyor, Bar Feed Interface, More.Yes2009 Hyundai-Kia SKT-21 LMS Fanuc OiTC
Hyundai-KiaSKT-210 SY200616036LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEFanuc 18iTBVery GoodYes21.7" Swing, 9.5" Turn Dia., 4,000 RPM, 20 HP, 12 Sta. Turret, Collet Chuck Both Spindles, Tool Presetter, Chip Conveyor, LNS Bar Feed, More…Yes2006 Hyundai-Kia SKT-210 SY Fanuc 18iTB
MazakIntegrex 200 SY200016572LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEMazatrol Fusion 640 MTGoodYes20.87" Swing, 19.69" Turn Dia., 30" Turn Length, 5,000 RPM, 30 HP, 40 ATC, 8" 3-Jaw Hydraulic Chuck, Coolant Through ToolYes2000 Mazak Integrex 200 SY Mazatrol Fusion 640 MT
MazakIntegrex 300 S201216242LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEMazatrol MatrixVery GoodYesSwing 33.5", Swing Over C.S. 33.5", Maximum Turning Diameter 33.5", Length 60", Y-Axis, 4,000 RPM, 40 HP, 36 Sta. Turret, Sub Spindle, Full C-Axis, 10" 3-Jaw Hydraulic Chucks, Chip Conveyor, MoreYes2012 Mazak Integrex 300 S Mazatrol Matrix
MazakIntegrex i-300 S201416282LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEMazatrol Matrix 2Very GoodYes Yes2014 Mazak Integrex i-300 S Mazatrol Matrix 2
MazakQuick Turn Nexus-200 MS200416457LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEMazatrol Fusion 640 TGoodYesSwing 26.58", Swing Over C.S. 19", Maximum Turning Diameter 14.75" Length 22.63, 5,000 RPM, 35 HP, 12 Sta. Turret, Sub Spindle, Full C-AxisYes2004 Mazak Quick Turn Nexus-200 MS Mazatrol Fusion 640 T
MazakQuick Turn Nexus-200 MS200416493LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEMazatrol Fusion 640 TGoodYesSwing 26.58", Swing Over C.S. 19", Maximum Turning Diameter 14.75" Length 22.63, 5,000 RPM, 35 HP, 12 Sta. Turret, Sub Spindle, Full C-Axis, Chuck Air Blast, Parts Catcher, MoreYes2004 Mazak Quick Turn Nexus-200 MS Mazatrol Fusion 640 T
MazakQuick Turn Nexus-200 MS II200616459LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEMazatrol MatrixGoodYesSwing 26.58", Swing Over C.S. 19", Maximum Turning Diameter 14.75" Length 22.63, 5,000 RPM, 25 HP, 12 Sta. Turret, Sub Spindle, Full C-Axis, Parts Catchers, SMW Bar FeedYes2006 Mazak Quick Turn Nexus-200 MS II Mazatrol Matrix
MazakQuick Turn Nexus-250 II MSY200716232LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEMazatrol MatrixGoodYes Yes2007 Mazak Quick Turn Nexus-250 II MSY Mazatrol Matrix
MazakQuick Turn Nexus-250 MS200415821LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEMazatrol Fusion 640 ProVery GoodYes Yes2004 Mazak Quick Turn Nexus-250 MS Mazatrol Fusion 640 Pro
MazakQuick Turn Nexus-250 MSY201516451LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEMazatrol Matrix IIExcellentYes26.5" Swing, 16.04" SOC, 14.75" Turn Dia., 21.27" Turn Length, 4,000 RPM, 3" Bar Cap., 35 HP, 12 Station Turret, 10" 3-Jaw Hydraulic Chuck Main, 6" 3-Jaw Hydraulic Chuck Sub, Bar Feed, MoreYes2015 Mazak Quick Turn Nexus-250 MSY Mazatrol Matrix II
MazakSuper Quick Turn-18MS Mark II199616460LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEMazatrol T-PLUSGoodYes Yes1996 Mazak Super Quick Turn-18MS Mark II Mazatrol T-PLUS
MazakSuper Quick Turn-200 MSY200116018LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEMazatrol Fusion 640 TGoodYes Yes2001 Mazak Super Quick Turn-200 MSY Mazatrol Fusion 640 T
MazakSuper Quick Turn-200 MSY200316087LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEMazatrol Fusion 640 TGoodYes Yes2003 Mazak Super Quick Turn-200 MSY Mazatrol Fusion 640 T
Mori-SeikiNL-2000 SY - 500200516524LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEMori-Seiki MSX-850 IIIVery Good Swing Over Bed 36.37", Swing Over Saddle 29.72", Maximum Turning Diameter 14.01", Length 20", 5,000 RPM, 24.7 HP, 12 Sta. Turret, 2.55" Bar Capacity, Live Tooling, Chip Conveyor, Bar Feed Interface, Tool Setter, Parts Catcher, More....Yes2005 Mori-Seiki NL-2000 SY - 500 Mori-Seiki MSX-850 III
Mori-SeikiNL-2500 SY - 700200916497LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEMori-Seiki MSX-850 IIIVery GoodYesSwing 36.37", Swing Over C.S. 29.72", Maximum Turning Diameter 14.01", Length 27.75", Y-Axis, 4,000 RPM, 25 HP, 12 Sta. Turrets, Sub Spindle, Full C-Axis, Chip ConveyorYes2009 Mori-Seiki NL-2500 SY - 700 Mori-Seiki MSX-850 III
Mori-SeikiNLX-2500 SY - 700201316567LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEMori-Seiki M730BMVery GoodYesSwing 36.37", Swing Over C.S. 29.72", Maximum Turning Diameter 14.4", Length 27.75", 4,000 RPM, 3.1" Bar Cap., 35 HP, 12 Sta. Turret, Parts Catcher, Bar Feed Interface, More.Yes2013 Mori-Seiki NLX-2500 SY - 700 Mori-Seiki M730BM
Mori-SeikiSL-154 SY200216586LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEMori-Seiki MSG-805Very GoodYesSwing / Swing Over Cross Slide - 26.8" / 20.1", Maximum Turning Diameter / Length - 11.8" / 13.7", 6,000 RPM Main & Sub, 10 HP, 1.77" Bar Capacity, Collet Chuck on Main and Sub-Spindles, Bar Feed Interface, Bar Feed, Auto Parts Catcher, More..Yes2002 Mori-Seiki SL-154 SY Mori-Seiki MSG-805
OkumaCaptain L-370 MW BB200315923LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEOSP-E100LVery GoodYesSwing Over Bed 20.8", Swing Over Saddle 16.54", Maximum Turning Diameter 13.38", Length 20", 3,800 RPM, 30 HP, 12 Sta. Turret, Sub-Spindle, LNS Bar Feed, Two (2) Live Holders, Loaded With Options - Low HoursYes2003 Okuma Captain L-370 MW BB OSP-E100L
OkumaGenos L-300 MYW201516396LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEOSP-P300L-RExcellentYes20.47" Swing, 11.81" Turn Dia., 17.72" Turn Length, 3,800 RPM, 20 HP, 12 Sta. Turret, 10" 3-Jaw Hydraulic Chuck and 6" on Sub Spindle, Parts Catcher, Coolant Through, Loaded With OptionsYes2015 Okuma Genos L-300 MYW OSP-P300L-R
OkumaGenos L-300 MYW201616239LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEOSP-P300L-RExcellentYes Yes2016 Okuma Genos L-300 MYW OSP-P300L-R