Mori-Seiki Machines.com

Phone 352-799-8398 - Fax 352-799-0315

sales@moriseikimachines.com

 www.moriseikimachines.com

At Machine Tools 24/7 we never stop working to serve your machine tool needs

Use Space Provided Below For Your Notes on This Machine Quote - When Ready - Click File - Then Print on your Browser

Machine Tools 24/7 Machine Quote - Click on the Machine ID Number Below to View Then Print Machine Photos 

Below are the specs we have on file for this machine.  Please contact Machine Tools 24/7 if you have any questions.

Machine IDYearManufacturerModelControl
166832003Mori-SeikiMT-2000 SZMori-Seiki MSG-501TA (Fanuc 18iT)

 DescriptionSpec Values
Capacity:Swing Over Bed / Swing Over Saddle29.52" / 23.62"
 Maximum Turning Diameter Main / Sub21.6" / 11.02"
 Maximum Turning Length / Distance Between Spindles40.15" / 50.47"
Main Spindle:Speeds40 - 4,500 RPM
 Spindle Bore / Bar Cap / Spindle Nose2.87" / 2.5" / A2-6
 Motor (30 min. / cont.)20 / 15 HP
Sub-Spindle:Speeds60 - 6,000 RPM
 Spindle Bore / Bar Cap / Spindle Nose / Indexing2.2" / 1.75" / A2-5
 Motor (30 min. / cont.)10 / 7.5 HP
Turrets:Number of Positions - Turret / ATC (KM-63 Taper)12 Stations / 40 ATC
Travels:X-Axis Travel22.24" / 6.1"
 Z-Axis Travel42.4" / 36.73"
 Y-Axis Travel3.1" +/-
 B-Axis Travel (Gimble Head)120° +/-
 C-Indexing360,000°
Rotary Tools:Rotary Tool Speed4,000 RPM
 Rotary Tool Motor10 HP
Rapids:Rapid Traverse (X & Z / Y)945 / 630 IPM
 Sub Spindle Rapid Traverse787 IPM
Dimensions:Floor Space (L x W x H)150" x 114" x 105"
 Weight (approx)28,000 Lbs

 Equipped With
Additional Info.:8" 3-Jaw Chuck On Main Spindle, 6" 3-Jaw Chuck On Sup Spindle
 Coolant Through Spindle
 Rigid Tapping Milling Head
 High Pressure Interface
 MAPPS II Programming
 Tool Measuring System
 Chip Conveyor
 KM-63 Taper
 Large Selection of Tool Holders
Note:2002 Machine - Installed New in 2003

Type Your Notes About This Machine In The Space Below Before Printing

Take advantage of New IRS Tax Code Section 179 Depreciation says that for new and used machinery purchases up to $250,000 may be expensed in the first year…

TERMS: Cash or Cashiers Check with order, and all equipment is FOB on floor from sold location unless otherwise stated. All equipment subject to prior sales and is exclusive of any government tax. Equipment descriptions are intended only as a guide and their accuracy is not guaranteed. CONDITIONS: Item(s) are sold "As Is, Where Is" unless other arrangements have been made and conveyed in writing. There are no warranties, which extend beyond the description on the face hereof; quotation subject to change without notice. All agreements and/or contracts made by sales person are subject to approval. -EQUIPMENT SAFETY: It is the buyer's/user's responsibility to provide proper safety devices and equipment to safeguard persons from harm resulting from any particular use, operation or set-up, and to adequately safeguard the equipment conform to all Federal, State and Local Government Safety Standards and all Industrial Standards. - INDEMNIFICATION: Buyer/User agrees to Indemnify and hold harmless Seller and Salespersons from any and all claims or liabilities caused by or arising from the equipment on the face hereof. All equipment quoted is subject to prior sale. It is purchasers responsibility to verify machine condition, specifications and pay any and all applicable taxes.