| Type_Machine | Item_Wanted |
| AUTO CHUCKERS, SINGLE SPINDLE | Warner & Swasey 1 AC, 2 AC, 3 AC or 4 AC |
| AUTO SCREW MACHINES, SWISS, CNC-MILL and SUB SPDL | 2002+ Star SV-32 or SR-20RIII, Must have additional axes (B & E) on the turret |
| BAR LOADER-MAGAZINE TYPE, HYDRAULIC, PNEUMATIC and MECHANICAL | 3" x 12' Bar Feed |
| BORING MILLS, HORIZ, TABLE TYPE | 4" Manual HBM, Prefer East Cost Machine |
| BORING MILLS, HORIZ, TABLE TYPE | 1980+, 48"x 72" table, 84" cross travel, 60" vertical travel, angle head, face plate and DRO's |
| BORING MILLS, HORIZ, TABLE TYPE CNC and NC | 4" or 5" HBM, 60"+ Table, Must Have Rotary Table, 50 Taper, Must Be Japanese or American Machine |
| BORING MILLS, HORIZ, TABLE TYPE CNC and NC | CNC HBM with 98" X, 56" Y, 36" Z Minimum Travels, Fanuc Control, Coolant Through, With or Without Rotary Table |
| BORING MILLS, HORIZ, TABLE TYPE CNC W-ATC | 2002+ Kuraki KBM-11XA |
| BORING MILLS, VERTICAL and VTL | Looking for a 36" Bullard Man-Au-Trol for parts |
| BORING MILLS, VERTICAL and VTL | We need a 1965+ Manual VTL With a 16' Table and 100" UR |
| BORING MILLS, VERTICAL and VTL | Bullard Cutmaster 42" or 54", preferably a 3-jaw chuck |
| BORING MILLS, VERTICAL and VTL | Looking for a manual 42" - 50" VTL, Prefers Bullard |
| BORING MILLS, VERTICAL and VTL | 144"+ VTL 98"+ Under Rail, 60,000+ Lbs Table Capacity |
| BORING MILLS, VERTICAL and VTL | Bullard 42" Cutmaster (only), Must have 4-Jaw Chuck |
| BORING MILLS, VERTICAL and VTL, CNC and NC | 1997+ - 36" - 48" CNC VTLOlympia V40 or Mazak Perferred |
| BORING MILLS, VERTICAL and VTL, CNC and NC | 41"+ Swing CNC VBM With 3-Jaw Power Chuck |
| BORING MILLS, VERTICAL and VTL, CNC and NC | CNC VBM with 86" Chuck and about 85"+ Under Rail, Will Consider Live Tooling Machines |
| BORING MILLS, VERTICAL and VTL, CNC and NC | 65" - 110" Chuck CNC VTL With Live Tooling and Fanuc Control |
| BORING MILLS, VERTICAL and VTL, CNC W-ATC | 115"+ Swing CNC VTL With Live Tooling, As new as possible |
| BORING MILLS, VERTICAL and VTL, CNC W-ATC | 1990+ 42" - 56"+ CNC VTL, 500 RPM or More |
| BORING MILLS, VERTICAL and VTL, CNC W-ATC | 2000+, O-M with 53" Swing |
| BORING MILLS, VERTICAL and VTL, CNC W-ATC | Daewoo / Doosan Puma VT-900 |
| BORING MILLS, VERTICAL and VTL, CNC W-ATC | 2006+ Doosan VT-900 |
| COORDINATE MEASURING MACHINES | 2000+ Mitutoyo BH-506 |
| DRILLING and TAPPING MACHINES CNC | 2004+ Robodrill A-T14 or Robodrill A-T21, 8 - 10,000 rpm's, no pallets needs |
| DRILLING and TAPPING MACHINES CNC | 2004+ Fanuc Robodrill With 24,000 RPM Spindle, with pallet changer |
| DRILLING and TAPPING MACHINES CNC | Robodrill, Brother or Haas DT-1 |
| EDM - WIRE, CNC | Charmilles Robofil 690, or a small edm to fit in 70" x 90" Door |
| FLANGERS | #4 Blue Valley Circle Flanger |
| GRINDERS, ROLL | 12"+ x 144" Grinder |
| GRINDERS, SURFACE, RECIPROCATING TABLE, HORZ. | 1995+ Okamoto 2040 EX, Would Prefer Fine Line Chuck |
| GRINDERS, SURFACE, RECIPROCATING TABLE, HORZ. | 24" x 60" up to 32" x 80" Surface Grinder |
| GRINDERS, SURFACE, RECIPROCATING TABLE, HORZ. | Okamoto ACC-1632 ST |
| GRINDERS, TOOL and CUTTER, NC-CNC | Any Walter 500 or 600 Series Grinder |
| LASERS | 48" x 48" Laser to cut 1/8 Stainless Steel |
| LASERS | Needs a Tube Laser That Does 8"+ Square Tubing (like BLM Adige LT-8) |
| LATHES, CNC, 2-AXIS, CHUCKER | Hitachi-Seiki Hitec-Turn 23 S III |
| LATHES, CNC, 2-AXIS, UNIVERSAL | Late Model Haas TL-2 |
| LATHES, CNC, 2-AXIS, UNIVERSAL | 1995+ (a must) Mazak Quick Turn-15N, 18N or 20N |
| LATHES, CNC, 2-AXIS, UNIVERSAL | Looking for a 2000+ Mazak Powermaster 3000 |
| LATHES, CNC, 2-AXIS, UNIVERSAL | Haas ST-30 Lathe |
| LATHES, CNC, 2-AXIS, UNIVERSAL | Mori-Seiki SL-35B/750 or Smiliar Size Mazak, must have Tool Eye |
| LATHES, CNC, 2-AXIS, UNIVERSAL | CNC Lathe with 25" - 30" Cutting Capacity, 60" - 72" Centers, 4”+ Bar Capacity, prefer Fanuc, Slant Bed, will consider Haas SL-40TL |
| LATHES, CNC, 2-AXIS, UNIVERSAL | 2000+ 8" - 10" Chuck, 15" Turn Diam, 20" BC, 2.5" Bar Cap., 20 HP, Fanuc |
| LATHES, CNC, 2-AXIS, UNIVERSAL | 1985+ Nakamura Slant SC-450 |
| LATHES, CNC, 2-AXIS, UNIVERSAL | 2002+ Tornos Deco 13A |
| LATHES, CNC, 2-AXIS, UNIVERSAL | 2004+ Haas SL-10T or SL-10T BB |
| LATHES, CNC, 2-AXIS, UNIVERSAL | 1998+ Haas SL-20T |
| LATHES, CNC, 2-AXIS, UNIVERSAL | Okuma LB-15 II MW BB, Would Like X / Y Conversion Utility |
| LATHES, CNC, 2-AXIS, UNIVERSAL | 2005+ Daewoo Lynx-220C with tailstock |
| LATHES, CNC, 2-AXIS, UNIVERSAL | 2004+ Daewoo / Doosan Puma-300 C or Puma-300 LC |
| LATHES, CNC, 2-AXIS, UNIVERSAL | 1997+ Okuma LB-15 II BB |
| LATHES, CNC, 2-AXIS, UNIVERSAL | We need a CNC lathe, with 60"+ swing over cross slide, 24'+ between centers and about 70,000 pound weight capacity |
| LATHES, CNC, 2-AXIS, UNIVERSAL | Haas SL-30T BB or SL-40T, Will Consider Other Mfg with 4" Bar Capacity and Fanuc Control |
| LATHES, CNC, 2-AXIS, UNIVERSAL | Late model Hardinge with Two Turrets, tailstock of sub-spindle and with or without live tooling |
| LATHES, CNC, 2-AXIS, UNIVERSAL | Manual or NC Lathe with 30" - 33" Swing, 18"+ OCS and 60" - 70" Centers |
| LATHES, CNC, 2-AXIS, UNIVERSAL | 1997+ Okuma Cadet LNC-8 BB |
| LATHES, CNC, 2-AXIS, UNIVERSAL | 2004+ Haas TL-2 With Collet Closer |
| LATHES, CNC, 2-AXIS, UNIVERSAL | 2003+ Haas SL-40TL BB |
| LATHES, CNC, 2-AXIS, UNIVERSAL | Johnford ST-60CH or ST-70CH |
| LATHES, CNC, 2-AXIS, UNIVERSAL | 2003+ Haas SL-20T |
| LATHES, CNC, 2-AXIS, UNIVERSAL | 2004+ Daewoo / Doosan Puma-300 L, Hydraulic Steady Rest |
| LATHES, CNC, 2-AXIS, UNIVERSAL | 2006+ Haas TL-2 |
| LATHES, CNC, 2-AXIS, UNIVERSAL | 2000+ 12" Chuck, 2.1" - 3" Bar Capacity, Fanuc Control |
| LATHES, CNC, 2-AXIS, UNIVERSAL | 2006+ CNC Lathe 10" Turn Diameter x 108" Turn Length |
| LATHES, CNC, 2-AXIS, UNIVERSAL | Okuma Captain L-370 or L-470 |
| LATHES, CNC, 2-AXIS, UNIVERSAL | 2005+ Haas TL-2 |
| LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING | Haas SL-20T or SL-30T With Live Tooling |
| LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING | Needs a 2006+ 3-Axis (live tool) Lathe with 12"+ Max. Machine Dia. X 60", 3 1/4" Bar Capacity |
| LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING | Okuma Captain With Milling, Big Bore and 200 Series Control |
| LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE | Late Model Mori-Seiki NL-2000Y |
| LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE | Late Model Mori-Seiki NL-2000 Series Machine With Sub-Spindle and Y-Axis |
| LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE | 2005+ Doosan Puma-240 MSC |
| LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE | Late Model NL-2000 SMC or NL-2500 SMC |
| LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE | 1994+ Hardinge 42 or 51 with live tooling and sub spindle, must be Full C-Axis |
| LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE | 2007+ Okuma Captain L-370 MW or Captain L-370 M BB, With a Sub-Spindle |
| LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE | 2005+ Haas Lathe with Live Tooling & Sub Spindle Lathe |
| LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE | Late Model Mori Seiki SL-2500Y or a Mori Seiki NL-2500Y |
| LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE | 2004+ Hardinge Elite II 8/51 |
| LATHES, CNC, 4-AXIS, CHUCKER | 2001+ Kitako MT4-200, Would consider 2001+ VT4-200 |
| LATHES, CNC, 4-AXIS, UNIVERSAL | 2001+ Four (4) Axis Lathe With Tailstock, Mori-Seiki ZL or Others Mfg |
| LATHES, CNC, 4-AXIS, UNIVERSAL | Late Model Okuma Like LU-35 with tailstock |
| LATHES, CNC, 4-AXIS, W-MILLING | 1997+ Mori-Seiki ZL-35 |
| LATHES, CNC, 4-AXIS, W-MILLING | 2000+ Mori-Seiki ZT-1000 Y |
| LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLE | 2003+ Hardinge Conquest TT-65Y or Quest 6/42 |
| LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLE | 2001+ - Mori-Seiki ZL-150 S |
| LATHES, CNC, 6-AXIS, W-MILLING and SUB-SPINDLE | Mori-Seiki NT-4250, NZ-2000T 2Y or NZL-2500Y/1000 |
| LATHES, ENGINE | 60"+ Swing OCS x 240"+, Need Taper Attachment and Threading |
| LATHES, ENGINE | 24" - 30" x 120" Engine Lathe, 4" Hole, Inch / Metri Threading, Taper Attachement a Plus |
| LATHES, ENGINE | Looking for Hollow Spindle Lathe with 14” Spindle Bore(minimum) with taper attachments |
| LATHES, ENGINE | 34" Swing Over Bed x 120" Centers, 600+ RPM |
| MACHINING CENTERS, GANTRY TYPE, NC-CNC | 150" x 48" - 60" Bridge Mill |
| MACHINING CENTERS, GANTRY TYPE, NC-CNC | 2002+ 196" X-Travel x 98" Y-Axis Travel, 44,000 Table Load Capacity, 3 Axis with a Right Angle Head or 5 Axis Gimble Head |
| MACHINING CENTERS, GANTRY TYPE, NC-CNC | Need a Haas GR-510 or GR-710 |
| MACHINING CENTERS, GANTRY TYPE, NC-CNC | Late Model Haas GR-510, GR-710 or GR-712 With 6" Riser or Extended Z-Travel |
| MACHINING CENTERS, GANTRY TYPE, NC-CNC | 2004+ Haas GR-510 |
| MACHINING CENTERS, GANTRY TYPE, NC-CNC | 1998+ Okuma MCV-20A II |
| MACHINING CENTERS, GANTRY TYPE, NC-CNC | Looking For a Haas GR-512, Like Vacuum Table, 10,000 RPM, Rigid Tapping |
| MACHINING CENTERS, HORIZONTAL CNC | 2000+ Haas HS-1RP, Must Have 10,000 RPM and 30 HP |
| MACHINING CENTERS, HORIZONTAL CNC | 2006+ Bridgeport HMC-700-XP 3e |
| MACHINING CENTERS, HORIZONTAL CNC | 2003+ 20" or 24" HMC, Coolant Through, 60+ ATC, 50 Taper, Prefer Mori Seiki or Makino |
| MACHINING CENTERS, HORIZONTAL CNC | 2005+ 32"+ Pallet HMC with minimum 49" in Y-Travel |
| MACHINING CENTERS, HORIZONTAL CNC | Makino A-61 or Mori-Seiki NH-5000 / 40 |
| MACHINING CENTERS, HORIZONTAL CNC | Looking for a 1997+ Toyoda FA-450 II, preferably with pallet pool system |
| MACHINING CENTERS, HORIZONTAL CNC | Looking for a Cincinnati 1985+ Vintage 10HC-2500A with 60" Y-Axis, Fixed Column and Cat 50 tooling |
| MACHINING CENTERS, HORIZONTAL CNC | 24" - 31" Pallets, Box Ways, Geared Head, 39" in X-Travel, 1 Deg. Or Full 4th, Coolant Through, No Haas or Mazak |
| MACHINING CENTERS, HORIZONTAL CNC | Mori-Seiki NH-4000 |
| MACHINING CENTERS, HORIZONTAL CNC | 24" - 31" Pallets, Full 4th |
| MACHINING CENTERS, HORIZONTAL CNC | 2003+ Kitamura HX-300IF, 80 ATC, High Pressure Coolant Through |
| MACHINING CENTERS, HORIZONTAL CNC | 2004+ Mori-Seiki NH-5000, 40 Taper, 14,000 RPM's with 180+ ATC and extra pallets |
| MACHINING CENTERS, HORIZONTAL CNC | Horizontal Machining Center or Horizontal Boring Mill with 160"+ in X-Travels, Fanuc 6MB Cotroller or Better, 1 Deg. Table |
| MACHINING CENTERS, HORIZONTAL CNC | 2005+ Makino A-51, Full 4th Axis, Pro-5 Control, 14,000 RPMS |
| MACHINING CENTERS, HORIZONTAL CNC | 2000+ Mazak FH-5800 Multiple Machine FMS Cell |
| MACHINING CENTERS, HORIZONTAL CNC | 2000+ 24" - 32" HMC, 4,000 - 6,000 RPM, Geared Head 60+ ATC, Coolant Through a Plus |
| MACHINING CENTERS, VERTICAL, CNC | VMC to do 73" x 30" Aluminum, does not like haas |
| MACHINING CENTERS, VERTICAL, CNC | Haas VF-1 or VF-2 |
| MACHINING CENTERS, VERTICAL, CNC | Looking for a 1996+ VF-0E |
| MACHINING CENTERS, VERTICAL, CNC | 2003+ Enshu 800 or 1000, 10,000 RPM |
| MACHINING CENTERS, VERTICAL, CNC | 2000+ Okuma Cadet V-4020 |
| MACHINING CENTERS, VERTICAL, CNC | Haas TM-1 Without a Tool Changer |
| MACHINING CENTERS, VERTICAL, CNC | Haas VF-5/50, VF-6/50 or VF-7/50 |
| MACHINING CENTERS, VERTICAL, CNC | 2004+ Haas VF-2 or VF-2 SS |
| MACHINING CENTERS, VERTICAL, CNC | 2006+ Haas VF-2 or VF-2 SS, 4th Axis Wired, Coolant Through Spindle a Plus |
| MACHINING CENTERS, VERTICAL, CNC | Haas TM-2 With 20 ATC |
| MACHINING CENTERS, VERTICAL, CNC | 2003+ Haas VF-2 or VF-2 SS |
| MACHINING CENTERS, VERTICAL, CNC | 1994+ Bostomatic BD-40 with Tilt Head |
| MACHINING CENTERS, VERTICAL, CNC | 1999+ Milltronics VM-24 |
| MACHINING CENTERS, VERTICAL, CNC | 2000+ Roku Roku with 20,000 RPM or More Spindle |
| MACHINING CENTERS, VERTICAL, CNC | 2000+ 40" x 20"+ Travel Okuma (only), 4th or 5th Axis Ready, DNC-B |
| MACHINING CENTERS, VERTICAL, CNC | Hurco VMX-64 40T |
| MACHINING CENTERS, VERTICAL, CNC | 1999 - 2002 Haas VF-5/50 or VF-6/50 With Coolant Through Spindle and Side Mount ATC |
| MACHINING CENTERS, VERTICAL, CNC | 2005 or newer Miltronics vertical cnc |
| MACHINING CENTERS, VERTICAL, CNC | 2007+ Hurco VM-2 |
| MACHINING CENTERS, VERTICAL, CNC | 2004+ Haas VF-6/40 With 5th Axis Trunion Table |
| MACHINING CENTERS, VERTICAL, CNC | 1996+ SNK FSP-120V 5 Axis Machine With Geared Head |
| MACHINING CENTERS, VERTICAL, CNC | 2004+ Haas VF-1 |
| MACHINING CENTERS, VERTICAL, CNC | 2005+ Haas VF-8/40 or VF-9/40, 10,000 RPM, High Speed Machining, Probe |
| MACHINING CENTERS, VERTICAL, CNC | 2004+ Mazak VTC-300C |
| MACHINING CENTERS, VERTICAL, CNC | Late Model 90" x 40" VMC, 50 Taper Only, Prefer Haas |
| MACHINING CENTERS, VERTICAL, CNC | 2002+ Haas VF-6/50, 30 HP Machine Preferred |
| MACHINING CENTERS, VERTICAL, CNC | 2005+ Fadal VMC-4020 HT, 4th Axis Interface, High Speed CPU, Would Consider Extended Z-Travel Machine |
| MACHINING CENTERS, VERTICAL, CNC | Looking for a Mori-Seiki Model: NMV-3000 DCG With MSX-711IV Control |
| MACHINING CENTERS, VERTICAL, CNC | 2001+ OKK VM-7 |
| MACHINING CENTERS, VERTICAL, CNC | 1999+ Hardinge VMC-1000 |
| MACHINING CENTERS, VERTICAL, CNC | 2007+ Mori-Seiki NV-5000A1B / 50, with 5th Axis Rotary Table, Coolant Through, Ethernet, Data Server |
| MACHINING CENTERS, VERTICAL, CNC | 2004+ Haas VF-3 APC |
| MACHINING CENTERS, VERTICAL, CNC | 2005+ Mori Seiki NV-5000 or Duracenter 5 Series, 40 Taper, With Coolant Through Spindle |
| MACHINING CENTERS, VERTICAL, CNC | 2003+ Mazak VTC-200 or VTC-300 Mazak |
| MACHINING CENTERS, VERTICAL, CNC | 2003+ Haas VF-OE or VF-2 with Remote Jog Handle |
| MACHINING CENTERS, VERTICAL, CNC | 2004+ Haas VF-2 APC or VF-3 APC, Would consider Hardinge XR 1000 APC |
| MACHINING CENTERS, VERTICAL, CNC | Older Okuma (only) VMC with 50"+ Table |
| MACHINING CENTERS, VERTICAL, CNC | Haas TM-1P (only) |
| MACHINING CENTERS, VERTICAL, CNC | 1998+ Leblond-Makino SNC-64 |
| MACHINING CENTERS, VERTICAL, CNC | 2003+ VF-4 SS with 40 ATC |
| MACHINING CENTERS, VERTICAL, CNC | 2002+ Haas VF-2 SS and VF-3 SS, Side Mount ATC, Rigid Tapping, P-Cool, Auger, 10,000 RPM's or above |
| MACHINING CENTERS, VERTICAL, CNC | Looking For a Haas TM-1 |
| MACHINING CENTERS, VERTICAL, CNC | 2005+ Haas VF-6, VF-7 or VF-8 |
| MACHINING CENTERS, VERTICAL, CNC | Looking for a Haas VS-1 or similar, 84" x 50" x 50" C-Frame |
| MACHINING CENTERS, VERTICAL, CNC | 2006+ Haas VF-2 or VF-3, must have Probing, Spindle Orientation, Side Mount ATC |
| MACHINING CENTERS, VERTICAL, CNC | VMC with 60" - 80" In X-Travel, 50 Taper, Box Ways, Geared Head, Prefer Fanuc |
| MACHINING CENTERS, VERTICAL, CNC | 1995+ VMC with 60" x 30" Travels, prefer 50 taper |
| MILLERS, PLANER TYPE, BRIDGE STYLE | 60" - 72" Wide x 30'+ Long, Must have 50 HP Head, Need 1-Vertical and 2-Horizontal Head |
| MILLERS, UNIVERSAL | Bridgeport Series 1 with power feeds, would like machine with riser |
| MILLERS, VERT-UNIVERSAL NC and CNC | Looking for a 10" to 12" x 50" CNC Knee Mill |
| MILLERS, VERT-UNIVERSAL NC and CNC | Fryer MB-15 |
| MISCELLANEOUS COMPONENTS | Pallets For a Cincinnati Maxim-500 |
| MISCELLANEOUS COMPONENTS | Parts Stocker for an Okuma & Howa 2SP-35HG |
| MISCELLANEOUS COMPONENTS | Any Buffalo Angle Roll Tooling, For 1/2, 1 or 2 size machines |
| PUNCHES, TURRET, NC and CNC | Trumpf TruPunch 5000 |
| ROLLS, ANGLE BENDING | Looking for a Roundo R-6 or R-7 |
| ROLLS, ANGLE BENDING | Roundo R-8 or R-9, Looking for an 8" Size Angle Roll |
| ROLLS, PLATE BENDING, INITIAL PINCH | 10' x 1 1/4"+ Plate Roll, Must have four (4) Rolls |
| ROLLS, PLATE BENDING, PYRAMID TYPE | 14' x 1/2" Plate Roll For Stainless |
| ROLLS, PLATE BENDING, PYRAMID TYPE | 16' x 3/8" Plate Roll For Stainless |
| SAWS, BAND, HORIZONTAL | 24" Capacity HBS |
| TABLES, NC and CNC | 2004+ Haas HRT-160 or HRT-210, Brushless Style |
| TABLES, NC and CNC | Brush Type HRT-210 or HRT-310 with a Tailstock and Chuck |
| TABLES, NC and CNC | 1998+ Haas HRT-210 Rotary |
| TABLES, NC and CNC | Haas HA-5C, HA-5C2C, HRT-A5 or HRT-A6 |
| TABLES, NC and CNC | 1999+ Haas HRT-310 Rotary Table |
| TABLES, NC and CNC | Haas TRT-210 |
| TABLES, NC and CNC | 12", 15" or 22" for a 2001 Mazak VTC-250D |
| TABLES, NC and CNC | Looking For a Haas HRT-210 Brushless |
